Nowości, promocje, informacje
Stan produktu: Nowy
9-inch IPS LCD
The M-1093F adopts 2× 9-inch IPS (In-Plane Switching) LCD panels, with Full HD 1920×1200 resolution and LED backlight, 800:1 contrast. The viewing angle is Horizontal: 170° / Vertical: 170°
SDI / HDMI / CVBS / Analog Audio
Video Analysis Assistant Pattern
M-1093F supports video analysis assistant patterns includes: Waveform (Y/Pb/Pr/R/G/B), Vector scope, Histogram (R/G/B/Y), to convert the digital video quality info (Luma, Color, Saturation, etc) to patterns, and the patterns can be switched on/off individually, select display position (Up/Down/Left/Right), size, color, and translucence.
Embedded Audio Monitoring
M-1093F supports SDI-16ch and HDMI-8ch embedded audio meters display, with marks and audio abnormal alert info. Users can also select any 2 channels audio to output via 3.5mm socket or speakers. The audio meter pattern position can be selected from one of four corners, and you can select to display only 2 channels, 8 channels, and full 16 channels. Also scale markers, alert info, and translucent of the audio meter pattern are selectable.
UMD and Text-Tally Display
TSL 3.1 / 4.0 Protocol
|Peaking, R/G/B/Mono only, Zebra, False color
|Timecode, H/V delay, AFD, Scale Markers
USB Firmware Upgrade
The monitor provides a standard USB port on the rear panel, for firmware upgrade. Users can download the latest firmware file to a USB stick, and directly insert into M-1093F monitor to upgrade, without PC connection.
3-color TALLY LightRJ45(RS485) input signal
There are front TALLY lights of Red, Green and Yellow colors on each screen, and users can define the pins of RJ45 port to control the TALLY lights.
M-1093F provides a 4-pin XLR socket of DC 6.5-24V power input, for the both 2 screens, and an AC-DC adaptor is attached on the rear panel of the monitor.
M-1093F is standard 19” rack mount fixing, occupies 4U height. The monitor is ±30° up and down rotatable when installed on racks.
M-1093F offers the following accessories as standard package:
|Input Video Formats
M-1093F support the following input video formats:
The waveform is a pattern to measure and display the brightness and its distribution of every column of the input video, separates the Y, Cb, Cr, R, G, B channels, and support single line waveform. You can select 0-1079 lines of the image, to display waveform of this single line.
The vector scope pattern is to visualize the chrominance of input video signal by the distribution of color in the image on a circular scale. It represents saturation as distance from the center of the circle, and hue as the angle, in standard position around it. So you can see how saturated the image is and where the pixels in the image land on the color spectrum.
The histogram is a bar graph that shows the distribution of R/G/B/Y(Luma) values in the image. The histogram is takes broadcast standard safety highest value as 100%, and 107% as the real highest value. The R/G/B/Y distributions between 100% and 107% are considered as ineffective values in broadcast standard, and marked in yellow to warn.
Audio Meter Level
Support SDI & HDMI embedded audio meters display, and 3G/HD-SDI displays 16-ch, SD-SDI and HDMI displays 8-ch. The audio meter is green, and will turn yellow when exceeds -20dB, and turn red when exceeds -9dB. You can also select any 2 channels audio to output via 3.5mm socket or speakers.
|GPI Interface and Control
The RJ45(RS485) port on the rear panel supports UMD control and GPI functions setting and control. There’re 4 GPI pins and can be assigned the following functions, by shorting with GND pin to enable the functions.
|Size||9 inches ×2|
|Aspect ratio||16:9 (4:3 adjustable)|
|Color||16.77 million colors|
|Viewing angle||Horizontal: 170°; Vertical: 170°|
|Input (Each LCD)|
|BNC ×2||2K/3G/HD/SD-SDI input ×2|
|BNC ×1||Composite input|
|HDMI ×1||HDMI input|
|3.5mm ×1||Analog audio input|
|Output (Each LCD)|
|BNC ×2||2K/3G/HD/SD-SDI loop output|
|BNC ×1||Composite loop output|
|HDMI ×1||HDMI loop output|
|3.5mm ×1||SDI, HDMI, Analog audio output|
|SDI||SMPTE 2048-2||2048×1080p (23.98 / 24 / 25 / 29.97 / 30 / 50 / 59.94 / 60)|
|2048×1080i (50 / 59.94 / 60)|
|SMPTE-425M||1080p (60 / 59.94 / 50)|
|SMPTE-274M||1080i (60 / 59.94 / 50)|
|1080p (30 / 29.97 / 25 / 24 / 23.98)|
|SMPTE-RP211||1080psf (30 / 29.97 / 25 / 24 / 23.98)|
|SMPTE-296M||720p (60 / 59.94 / 50)|
|ITU-R BT.656||576i (50)|
|HDMI||480i/ 576i / 480p / 576p|
|1080i (60 / 59.94 / 50)|
|720p (60 / 59.94 / 50)|
|1080psf (30 / 29.97 / 25 / 24 / 23.98)|
|1080p (60 / 59.94 / 50 / 30 / 29.97 / 25 / 24 / 23.98)|
|Working voltage||DC / battery 6.5V-24V|
|Net weight (main body)||2.8kg|